• Having site issues? Contact Dub@southernPolyurethanes.com

Search results

  1. A

    Sprayer

    This is a battery operated power sprayer. Can spray out of 2l soda bottle or has a dip hose for a bucket/lake/toilet..... 40v battery. Handy for us without water in the shop.
  2. A

    Tub lights

    Does anyone have experience with the infrared tub style lights? The kind with multiple heat lamps?
  3. A

    Anti-static gun

    Has anyone tried or purchased one of these new contraptions?
  4. A

    PPS 2.0

    Anyone use the new PPS 2.0 cups? This is a 3oz cup. How are you suppose to mix in it when the bottom of the cup doesn't even reach all of the gradations (the 2's on the 4:1:1)?
  5. A

    Fine line tape

    What fine line do you like? Thanks.
  6. A

    Curing lamps

    Something has been nagging me. But, enough about my wife. If the Universal tech sheet says to bake at 110-120 for 10-15 minutes. How does this change with lamps, either med or short (there really isn't that big of a difference in the two). Is temperature as important with radiant as it is...
  7. A

    What to keep

    L: Satajet RP 1.4 M: 4000B RP 1.2 R: 4000B HVLP 1.3
  8. A

    Shortwaves and Epoxy

    What are the parameters for using a lamp on epoxy i.e. to be able to apply filler over it and to ready sealer for basecoat?
  9. A

    Advice sought

    Noticed I didn't have coverage after first coat of clear. So, I kind of double dusted the base on after a few minutes,very few. Then, put on the next coat of clear. Well, in the touched up area, the dusted base changed orientation and stood right up. What's the prevention? Besides "make...
  10. A

    What would you charge?

    Customer wants me to paint all the chrome on his truck. Barry said it's done every day. I haven't commited to it yet but would like to know what you guys would charge.
  11. A

    3 inch buffer

    This might interest some of you that do smaller repairs or want to spot polish something. I found it on eBay for around $180.
  12. A

    Low air flow environment

    Since it's winter, I'm doing a lot of work in my garage and getting a lot more runs. It is heated but doesn't have a lot of air movement. I.E. yesterday it was 70 in the shop and I used Euro with regular act, and 885. Today, I got to sand out some runs. With the lack of air movement, should...
  13. A

    SATA 4400B RP

    Who uses one of these? I have the 1.0 tip and am not in love with it at all. I'm using for base and clear (UV maybe Euro] I was hoping to use it for a door sized projects. What about you folks?
  14. A

    6401 vs 6300

    Any advantage to either one for production type work? I have been using the 6401 as a primer mixed 4:1. Is the Turbo about the same mixed 4:1:1?
  15. A

    Tale of two compressors

    80 gal 17cfm Quincy 150psi at wall. 30 gal Harbor Freight 7cfm 150 psi. Same gun, same settings. Spraying at 29 psi. I get better results with the Harbor Freight tank. The Quincy looks likes the pattern is split. Any ideas why this might be happening?
  16. A

    Tale of two compressors

    80 gal 17cfm Quincy 150psi at wall. 30 gal Harbor Freight 7cfm 150 psi. Same gun, same settings. Spraying at 29 psi. I get better results with the Harbor Freight tank. The Quincy looks likes the pattern is split. Any ideas why this might be happening?
  17. A

    Bumper prep fail

    Two years ago I did an OEM bumper on a Honda CRV. Not exactly clear on my prep but was probably a grey pad to scuff. Don't remember if I used scuff paste. I did use epoxy sealer. That much I know. Well, the primer has let go of the plastic. Paint is sticking to the primer beautifully. Do...
  18. A

    Estimating software

    Is there a non-subscription estimating software for the occasional user? If not, is there a general formula you use to make an estimate? Thanks Kent
  19. A

    Estimating

    Any tips on how to estimate a charge for a respray on a Silverado? It's not the preferred situation. Customer is doing his own body work and wants to do the pre-paint work too. Not sure if I'll let that the pre-paint part happen though. I haven't actually seen the thing yet but he will want...
  20. A

    Residential door painting

    Please give me some info on products you use and what you charge. And, how much time you allot. Thanks
Top