Search results

Thanks for the help, guys. I'm probably just going to get another tank.

What are you guys using to clean an old gas tank out and seal it? I have rinsed it out with water and gotten most of the rust flakes out, but it still looks pretty crusty inside. Ospho? Vinegar? Muratic Acid?

Looks great

Awesome, as usual. For some reason, I was not expecting blue?

Can't help you Crash, but '68: As much as I hate to recommend HF, I have this 1L cup on my LPH400, and it fits well HF Cup

If those pics are right out of the gun, you definitely nailed it!

Fixed it. 3/8 bolt with a 1/16 hole drilled through it.

An idea where I can buy this? Google hasn't been any help tonight.

Obviously never used Scuff Stuff before, but once you're finished with it, do you just clean it off with 710, or water, or how?

I agree with you, and that's what I try to do, see the wet edge of the previous pass and the paint atomizing out of the gun. But when you're stretched to the limit to reach the center of a roof, you see what you see. Like Crash said, you go into robot mode and hope for the best.

Thanks guys, I'll give it a shot. Worst that can happen is I spray 2 more coats (like I was planning to do anyway)

It really is my favorite color on a car, but I HATE spraying it. I don't feel like I can see while I'm spraying, and I have trouble seeing scratches when color sanding. Anyway, I sprayed the roof of a car over the weekend, 3 coats of SPI single stage white. Walking out of the booth I thought...

I didn't think you could get Hougen bit for a drill chuck, only for the Hougen magnetic drill?

What did you change that helped?

I like grey the best. I don't really need a guide coat with the grey or black, but many use it. Like Don said, everybody has their own method. (You definitely need a guide coat with white, but you weren't asking about that)

I get that you are applying more paint, but I'd still like to see the process. So 600 on a hard block, I assume a straight line sand, like you'd sand clear? Recoat, then start with 1200 for the final color sand?

I wish I could see a video of this being done. I've always been too chicken to start with paper that course.

Beautiful as always, you do great work. Why the Euro, instead of UC?

What's your plan for filling the pits? Filler, epoxy, poly, etc?