Blending problem

[AAE]

Was I asking too much? He did say he found one.

No way! Jim is the OZ of life! He knows and see's everything. He does have a 3D printer. He'd find a way to make one AND put an awesome wood grain effect on it.

 

[Jim C]

Lmao you guys are too much.

Chris, i bought that maybe 2-3 years ago. I will take a look though. I will double check the model of mine and see if i can find it

 

[elwood]

I have to admit I've learned a lot from Jim C.
@Jim C ,Thank you sir.

 

[crashtech]

@Chris_Hamilton I think AAE was just kidding, it does seem miraculous that a solution might just be that easy for your IR lamp! We've got a great group here!

 

[OJ86]

Was I asking too much? He did say he found one.

LMAO.....any time I have an issue and debate posting a thread I always think to myself....shoot Jim C probably has the answer...

 

[Jim C]

@Chris_Hamilton

i am 95% sure this element will work in your h&s m1500. im pretty certain this is the one i got. the elements h&s and infratech are using are pretty standard quarts tube elements and im sure neither company are making these themselves so they are not proprietary. they are just bending some sheet metal around it and selling it to people. if i remember correctly i just had to notch out the sheetmetal on each end where it holds it in place because it was maybe 1/2 longer or something. i remember doing something like that but its been awhile. either way i got it to work no problem. i also found this on amazon but it was more expensive.

Infratech INF10-1065 120V Replacment Element E-1512, 32"

Infratech INF10-1065 120V Replacment Element E-1512, 32" at Great Prices | National Tool Warehouse

www.nationaltoolwarehouse.com

 

[Barry]

@Chris_Hamilton

i am 95% sure this element will work in your h&s m1500. im pretty certain this is the one i got. the elements h&s and infratech are using are pretty standard quarts tube elements and im sure neither company are making these themselves so they are not proprietary. they are just bending some sheet metal around it and selling it to people. if i remember correctly i just had to notch out the sheetmetal on each end where it holds it in place because it was maybe 1/2 longer or something. i remember doing something like that but its been awhile. either way i got it to work no problem. i also found this on amazon but it was more expensive.

Infratech INF10-1065 120V Replacment Element E-1512, 32"

Infratech INF10-1065 120V Replacment Element E-1512, 32" at Great Prices | National Tool Warehouse

www.nationaltoolwarehouse.com

Perect, Chris, mine is a 2000-watt two-bulb if yours is the same.
Mine is a 2000 model number.