Leonard1
Professional Amateur
I have removed the inner roof structure out of a 68 pickup by drilling out the spot welds on the sides, and chiseling the spots along the rear seam. My plan was to make my repairs, epoxy behind the panels, and glue the rear seam back together with some kind of panel adhesive. I don't have any pics, but you can see the seam at the back of the cab here (special thanks to Sprint_9 for the use of his photo):
As you can see, there is no way to access it without removing the outer skin, which I really don't want to tackle. Anyway my questions are 1) what adhesive do you recommend? and 2) should I epoxy the seam flanges, as most instructions say grind to bare metal with 36g, leaving a heavy scratch.
As you can see, there is no way to access it without removing the outer skin, which I really don't want to tackle. Anyway my questions are 1) what adhesive do you recommend? and 2) should I epoxy the seam flanges, as most instructions say grind to bare metal with 36g, leaving a heavy scratch.