Dekups adapter for Vaper 2.3 ?

I just ordered a Dekups set up for my Iwata LPH-400-144LBV along with the DPC-11 adaptor. I would also like to use the Dekups on my Titan Vaper 2.3. I checked the thread on the Vaper and it is different than the Iwata.
Does anyone know if there is an adapter that will work on the Vaper? I hate cleaning the cup on the Vaper after spraying SPI 2K and the Dekups will make it easier to flush the gun between coats. I have looked at many suppliers and none of them list the thread size for the Dekups adapters. If they did I could just order one after checking my gun.

Thanks in advance for any help.
 
Last edited:
After checking a 3M hard copy catalog for PPS adapter's I found out that the Vaper 2.3 thread is listed as the same as the Iwata and also a Sharp FX-300 that I have also. I went back out to the shop and cleaned the threads on the Vaper gun of old dried paint and the are same as my Iwata. I had assumed that since the Vaper cup would not screw on to my Iwata Gun when I first tried it that they were different. When my DPC11 adapter comes in I will verify that it works and if it does I will order a second one.
 
My Dekups DCP-11 adapter finally came in today and it does indeed fit on the Vaper 2.3 spray gun and also my Iwata LPH-400. I hope to use the Vaper to spray some 2K later this week and I think I am going to really like the Dekups system.
 
Oh Good I use and like the Dekups. After I use base in the cup will rinse out with a little thinner and reuse for 2K .
 
Back
Top