Epoxy advice please

Lit549

Promoted Users
Quick question, i fixed my problem and sanded the epoxy. Being that i JUST sprayed it, what can i clean the sanded primer with? Being that its still curing, i dont wanna create anymore issues. Thanks!
 
What? You just sprayed the epoxy then sanded it and want to clean it? Maybe i am missing something here. tell us more
Yea, i sprayed the first coat to thick which caused some dimples everywhere. So had to sand it, and im about to clean the surface before second coat.
 
Yea, i sprayed the first coat to thick which caused some dimples everywhere. So had to sand it, and im about to clean the surface before second coat.

For best results if your're going to sand, you should wait 48 hours before sanding ( 24 hours minimum). After sanding, blow off with compressed air and clean area with SPI wax & grease remover 710. Blow off with air again, then wait an hour before applying another product, ie; filler or paint. Blowing off the panel with compressed air after sanding any product is a very important step. For me, the main reason is to expose any pin holes. If you only clean the area with wax and grease remover, you're taking the chance that a pin hole filled with sanding dust does not get removed. This could cause future issues later. Use compressed air before and after cleaning with wax and grease remover.
 
Last edited:
Back
Top