S
Siciliang35
Okay so tomorrow I want to get the bumper completely ready to paint and the fender off the car ready to paint.
I have a few questions here and I'll post a bunch of pictures. First question I have is what am I going to paint inside. I have two options one is that big tent which I can cover up with plastic and make it into a closed area. The problem with that is I'm in the middle of redoing a bathroom so there's crap everywhere and I'm going to have to clean it real good on the floor.
The second option is I have a small shed which I use to store stuff I can empty that out and paint in there.
Now as for all the damage on the car that I want to fix. Obviously there's the bumper, I redid my headlights and cleared them. With the bumper off and headlights out I can easily take out my fender . Paint the fender and the bumper and put it back on and be done with it along with the headlights.
now I still have my hood which I can take off without taking anything else off.
And here comes where I need help on planning
On the left side of the car is the fender I'm going to take off that I want to re do,
Right after the fender is the door and there's a scratch on the door
Right after the door is a small rust spot along The gas tank is just a little chip there.
Then at the bottom of the gas tank , on the rear fender, is like a plastic piece . It's more like a film that's all scratched up and I want to take that off I'm not sure why that's there
Now the right side rear fender well is all rusted and I'm going to have to fix that.
The issue is the hood the front fender and the bumper I could do either in the shed or the tent covered.
The rest of the stuff I'm going to have to do outside piece by piece. Am I going to have a problem with paint not looking matched up. Am I going to have to blend? How do I approach this
I have a few questions here and I'll post a bunch of pictures. First question I have is what am I going to paint inside. I have two options one is that big tent which I can cover up with plastic and make it into a closed area. The problem with that is I'm in the middle of redoing a bathroom so there's crap everywhere and I'm going to have to clean it real good on the floor.
The second option is I have a small shed which I use to store stuff I can empty that out and paint in there.
Now as for all the damage on the car that I want to fix. Obviously there's the bumper, I redid my headlights and cleared them. With the bumper off and headlights out I can easily take out my fender . Paint the fender and the bumper and put it back on and be done with it along with the headlights.
now I still have my hood which I can take off without taking anything else off.
And here comes where I need help on planning
On the left side of the car is the fender I'm going to take off that I want to re do,
Right after the fender is the door and there's a scratch on the door
Right after the door is a small rust spot along The gas tank is just a little chip there.
Then at the bottom of the gas tank , on the rear fender, is like a plastic piece . It's more like a film that's all scratched up and I want to take that off I'm not sure why that's there
Now the right side rear fender well is all rusted and I'm going to have to fix that.
The issue is the hood the front fender and the bumper I could do either in the shed or the tent covered.
The rest of the stuff I'm going to have to do outside piece by piece. Am I going to have a problem with paint not looking matched up. Am I going to have to blend? How do I approach this
Attachments
-
MVIMG_20200523_185514.jpg189.3 KB · Views: 167
-
MVIMG_20200523_185509.jpg167 KB · Views: 186
-
MVIMG_20200523_185434.jpg123.6 KB · Views: 189
-
MVIMG_20200523_185428.jpg173.2 KB · Views: 178
-
MVIMG_20200523_185404.jpg194.6 KB · Views: 189
-
MVIMG_20200523_185400.jpg150 KB · Views: 176
-
MVIMG_20200523_185340.jpg136.8 KB · Views: 193