Limco Supreme ? ?

C

C_REX

Ok so the Limco Supreme says its a acrylic enamel you add some hardener to it and can reduce it with urethane reduccer, I've sprayed it on a few vehicles already coverage sucks lol, but what I would like to know once the base has flashed could I use SPI's intercoat over the limco supreme? I dont know if this is a stupid question but I gotta know.

Next question if someone has time or could remember could you check your spi urethane reducer and post what amount of VOC is in a gallon , these new regulations are killin me.

thanks
 
C_REX;5353 said:
Next question if someone has time or could remember could you check your spi urethane reducer and post what amount of VOC is in a gallon , these new regulations are killin me.

thanks
Material Safety Data Sheet for Urethane Reducer:
http://www.southernpolyurethanes.com/MSDS Sheets/msds10/860-895 Urehthane reducers.pdf

You can get to all the MSDS sheets from the SPI web site. Just click on the "Product Line" button and you'll see a bunch of information, including the MSDS sheets:
http://www.southernpolyurethanes.com/
 
C_REX;5353 said:
Ok so the Limco Supreme says its a acrylic enamel you add some hardener to it and can reduce it with urethane reduccer, I've sprayed it on a few vehicles already coverage sucks lol, but what I would like to know once the base has flashed could I use SPI's intercoat over the limco supreme? I dont know if this is a stupid question but I gotta know.

Next question if someone has time or could remember could you check your spi urethane reducer and post what amount of VOC is in a gallon , these new regulations are killin me.

thanks

are u in cali?
 
All the normal reducers will be in the 6-8 lbs VOC per gallon, all the 0-Voc reducers are 0 of course.
Unless CA or Canada Voc of the reducers, should not be an issue.
 
Im in Canada SIK, so Barry your sayin the reducer cant be brought into Canada?
 
Back
Top