Overspray on epoxy primer

P

Progas32

Primered the truck cab the other day, did not have enough exhaust so I ended up with some overspray (and some dry-spray from the cup going empty at the end of the job). What's the best grit to dry sand this off? I'm just shooting the high build today or tomorrow and spot priming but I want to fully prime the truck again once I'm sure I've got it as straight as I can get it and I believe all the dry spray needs to go. I will have sufficient exhaust on the next spray.
 
Barry said:
For speed just hit over-spray with w red scuff pad to knock the loose stuff off.
The primer will take care of the rest.
Click to expand...
Thanks Barry. That's what I had started doing but wanted to make sure I was headed in the right direction. There's a couple areas inside I might have to lightly sand the primer as more hidden sand found its way out of hiding when I start painting around the cab structure. Prime the filler today then on to high-build on Wednesday.
 
You must log in or register to reply here.
Back
Top