reallylongnickname
Promoted Users
I will be putting on epoxy primer. Is it necessary to remove every last bit of the original paint and primer that you see? (disregard the flash rust)
Also, in the second pic, the sander is rated at 90 psi. Is that 90 psi while in operation? (At rest it's about 100 psi. When operating, it's about 60 psi)
Also, in the second pic, the sander is rated at 90 psi. Is that 90 psi while in operation? (At rest it's about 100 psi. When operating, it's about 60 psi)