Spray Booth Air Hose

El Toro

Member
Hi all have a question . What's a good place to buy a high quality air hose to use in the spray booth. My jobber just send me a Tsunami air hose 35 ' and wants $100 for the hose ? Am I out of the realistic world ? They don't recommend a standard hose as can brake down inside depositing little pieces of trash in finish.
 
I replaced my 3/8-inch hoses when cracks appeared. I found the 1/2-inch Flexzilla hose to be a good replacement and although not cheap, very reasonable. I put a 50-footer on my hose reel and it takes up only slightly more space than the 3/8 red rubber hose. They are available with 1/4-, 3/8-, or 1/2-inch fittings and flow some serious air. Bought mine on Amazon:
https://www.amazon.com/dp/B002PR7EUK/ref=twister_B06Y65GWJH?_encoding=UTF8&psc=1
220V Outlet 2.jpg
 
Yep Flexzilla here too. The only draw back I have with it is if I step on it sometimes it slaps my calf or the curl goes around my foot, could be just me though.
 
If you're using it for breathing air as well, you need a non-gassing air hose. Gates makes them..
 
i use the flexzilla also. just dont step on it while shooting . i also have the water hoses with quick connections. they are awesome .
 
Back
Top