M
mrmike7723
How many of you follow wandabase sanding recommendations? I here a lot of folks say P500 to P600 wet is great for metallic paints but Wanda's tech sheet says Dry sanding with final sanding step #P500 to #P600 · Initial sanding steps may be executed with a coarser sanding · If initially sanded with coarser paper, it must be over sanded with #P500 to P#600. Wet sanding with final sanding step #P800 to #P1000 · Initial sanding steps may be executed with a coarser sanding grit #P600 · If initially sanded with coarser paper, it must be over sanded with #P800 to P#1000. Should I follow there tech sheet and do my final dry sand with P600 and then wet sand with P800? Or is P400 dry and then p500 wet good enough? I'm doing a complete paint if that helps with any advise. Thanks.