what's everybody working on?

[ryan1]

Minus the 79 camaro that I have in a seperate thread, I did these wheels over the weekend.

uv clear, pro spray base.

nice job on the wheels...what project is getting the fiberglass repair (holes) I think I saw the wheels in the corner of that post .
A true professional ..you even masked the inside of the wheels.

 

[OJ86]

nice job on the wheels...what project is getting the fiberglass repair (holes) I think I saw the wheels in the corner of that post .
A true professional ..you even masked the inside of the wheels.

Well I gotta be honest. I painted the wheels twice. The first time I used my PLUS gun to clear them. I left the 1.4 tip in and didnt even dial the needle back. Lets just say I was humbled after looking at the 500 runs and sags. Serves me right for rushing and being a jackass. I had to sand and scuff the outside down and reshoot them, but the insides looked really nice. This time I just changed the cap on my iwata from the purple to the silver left the 1.3 and cranked the needled way in and took my time. They came out flawless, no sags nothing. Lesson learned!

The fiberglass stuff is for the 79 camaro I'm working on.

 

[jcclark]

looks like you have some work to do ...hood looks like it was pushed up hopefully it's ok?

Hood is OK, it's just not closed all the way.

 

[shine]

retirement.................

 

[rusty428cj]

We are working on or need to work on the following:
1968 Eleanor Mustang, 1965 Mustang Fastback, 1966 Mustang Fastback, 1968 Mustang Coupe, 1965 Mustang Coupe, 1969 Mustang Fastback, 1969 Nova, 1967 Fairlane, 1967 Camaro, Vega Drag Car, 1969 Mustang Drag Car, 1950 Willys PU, 1986 T-Bird, 1988 Mustang, 1966 Chevelle and a 1968 F-350 Race car hauler

 

['68 Coronet R/T]

Ha, ha so what are you doing typing in this forum. LOL
I take on one job at a time cause that's all I have room and time for.

 

[OJ86]

We are working on or need to work on the following:
1968 Eleanor Mustang, 1965 Mustang Fastback, 1966 Mustang Fastback, 1968 Mustang Coupe, 1965 Mustang Coupe, 1969 Mustang Fastback, 1969 Nova, 1967 Fairlane, 1967 Camaro, Vega Drag Car, 1969 Mustang Drag Car, 1950 Willys PU, 1986 T-Bird, 1988 Mustang, 1966 Chevelle and a 1968 F-350 Race car hauler

What do you do with your free time?

 

[Dub]

Don't know how or why but I'm stuck on trailers.... Just rebuilt the dolly. Almost completely. A dozen more trailers to go...

 

[strum456]

Dub,

That is the nicest car dolley I have ever seen.


I have been doing some metal work. I joined Metalmeet.com and attended my first meet a couple week ago (a very good experience). The tool box is for one of my Ford tractors. I am just about ready to do a blend on that rear panel and get my car put back together for summer

 

[Dub]

Very nice work there Bud.

Just put a fire stick in my hand and run!!! lol I'm a fabricating fool I ware out a 4 1/2" grinder in 6 months. I burnt up 180 lbs of rod this year. so far.

Wish i had pics of the last one. Built it from scratch. Everything rusts so bad here I have more work than i can physically do. But hell it almost pays the bills lol

 

[ryan1]

Dub,

That is the nicest car dolley I have ever seen.


I have been doing some metal work. I joined Metalmeet.com and attended my first meet a couple week ago (a very good experience). The tool box is for one of my Ford tractors. I am just about ready to do a blend on that rear panel and get my car put back together for summer

I'm supposed to go to metalmeet in santa cruz im on the paid list ...its about a seven hour drive ( im in socal) your project box looks very nice and its a pretty complex piece ...good job. I
Did you bring alot of stuff to metalmeet?

 

[strum456]

I didnt bring anything other than safety gear and projects. The host ( Gator) had all the tools one would ever need.

 

[Outlaw]

Hey ryan, how is your 56 coming along?

 

[chevman]

Ryan has been MIA for over three years.

 

[Outlaw]

Thanks Chevyman.

 

[camarobuilder]

building another 69 camaro

 

[ksungela]

another restomod build.

started with this

tore it down to this:

building it back up: