Hi, I have my car ready for paint using all SPI products except basecoat which is motobase. I have a 3 day window next week for great weather. Just want to make sure I’m not missing anything.
Car is wet sanded to 600 grit. (2k primer). It has been sitting in the shop for the last month waiting for the weather.
Day1- gray scotch brite entire car. Wash with dawn. Tape up car. Clean with 710
Day 2- tack off car. Spay 1 coat of epoxy reduced .25%. After it drys correct any dust nibs or issues.
Day3- spray basecoat. Tack between coats.
Day 4- spray clear. 4 coats.
All the spraying will be done early in the morning so the car will sit about 24 hrs between days.
Anything I am missing? Or suggestions?
Thanks to everyone on this forum who has helped me get to this point.
Mike
Car is wet sanded to 600 grit. (2k primer). It has been sitting in the shop for the last month waiting for the weather.
Day1- gray scotch brite entire car. Wash with dawn. Tape up car. Clean with 710
Day 2- tack off car. Spay 1 coat of epoxy reduced .25%. After it drys correct any dust nibs or issues.
Day3- spray basecoat. Tack between coats.
Day 4- spray clear. 4 coats.
All the spraying will be done early in the morning so the car will sit about 24 hrs between days.
Anything I am missing? Or suggestions?
Thanks to everyone on this forum who has helped me get to this point.
Mike