JimKueneman
Mopar Nut
The vinyl top I put on my Coronet had a million bubbles in it since I put it on so I finally decided to put new glass in and replace the top. I thought it was my fault for not using enough 3M trim adhesive but what it seems like is the adhesive did not adhere to the SPI epoxy primer very well. After pealing off the top there is almost no glue left on the car it lifted right off the epoxy. I scuffed it up with 400 grit before I put on the top. Should I use something more aggressive? I used the 700 W&G remover before installing the top last time.
Thanks,
Jim
Thanks,
Jim