G
gst124
In planning stages for paint on a 7 year project nearing completion. Vans RV-7 that is currently bare aluminum. Skins have a thin layer of AlClad that seems to be an occasional issue based on my limited research. Was planning on scuffing with a Maroon Scotchbright pad and soap, followed by a degreaser and maybe a acid treatment prior to spraying a DTM epoxy primer. Considered an Alodine treatment first, but does not seem to be necessary in the limited research I have seen. Any recommendations on systems for prep would be greatly appreciated. Back to my actual question, I was thinking about spraying epoxy primer on everything and plan on a base coat at some point in the future after a light sanding. I realize this may not be the correct way to go about it, and asking for advice. Should I spray and epoxy primer and add a layer of sandable after? The individual parts may sit for months to year prior to putting down a base coat.