This will be my first time spraying a car and would like to make sure I have everything in order before attempting to spray SPI Epoxy primer. I am on a budget and think I may have been lucky enough to score most of the filtration setup for free. Please let me know if this is sufficient or if I should add a Motor Guard M60. I do plan on using one of the small inline MG filters on my spray gun. I cannot afford a refrigerator dryer yet but I do have an aftercooler on my pump and four 10' drops of 1" copper leading to my filter system. I live in a dry part of southern CA. Thank you in advance! Any advice is much appreciated.
This is what I have installed in this order:
Milton 1020 1/2"NPT 40 Micron 6oz. Filter
Dayton(SpeedAire) 4ZL18 3/4"NPT 32oz. .05 Micron Coalescing Filter
Arrow D12-04XL 2qt. 1/2"NPT Desiccant Filter Dryer
Barber Colman K360 1/2"NPT 5 Micron Filter Regulator Combo
This is what I have installed in this order:
Milton 1020 1/2"NPT 40 Micron 6oz. Filter
Dayton(SpeedAire) 4ZL18 3/4"NPT 32oz. .05 Micron Coalescing Filter
Arrow D12-04XL 2qt. 1/2"NPT Desiccant Filter Dryer
Barber Colman K360 1/2"NPT 5 Micron Filter Regulator Combo