S
Steves69LS3
Just noticed something a little weird. I used to spray epoxy with my sata 4000 rp with a 1.4 tip. I would do light to medium coats and i would notice tiny craters in the finish.
I recently bought a sata 100b rp with a 1.6 tip and first used it on the front forks of the mini bike i am restoring spraying the same epoxy and this time i really hammered it on. I mean bad were talking nonstop spraying until i ran out of paint. Dont know why i did this but after the epoxy cured a little. The finish was smooth as glass no imperfections whatsoever.
So when it comes to spraying epoxy, does it come down to the type of gun that is used? Or did i just get lucky??
I recently bought a sata 100b rp with a 1.6 tip and first used it on the front forks of the mini bike i am restoring spraying the same epoxy and this time i really hammered it on. I mean bad were talking nonstop spraying until i ran out of paint. Dont know why i did this but after the epoxy cured a little. The finish was smooth as glass no imperfections whatsoever.
So when it comes to spraying epoxy, does it come down to the type of gun that is used? Or did i just get lucky??