Help!

[Chandler]

sprayed this vette in August and decided to start the cut and buff process and now this has popped up. you can sand it and buff it and it is gone for a couple of days and then right back i have sanded it and left it for a few days before buffing once buffed it was gone then back again. any ideas would be helpful. Thanks.

 

[Barry]

Do you have sun or an infrared lamp? My guess is water, so we have to get rid of first than buff.

 

[Chandler]

Yes thank you Barry! I have put the car in the sun, although i have not sanded it since then.

 

[Barry]

MIN 3 FULL Days in raw sun.
before sanding or buffing.
That is a very min as no way to know.
Lamp 30 to 60 minutes and if water ready to buff.

 

[Chandler]

so i should stick it back in the sun for 3. full days before continuing with the cut and buff? Thanks.

 

[Barry]

Yes, but break spot open with1500

 

[Chandler]

Okay so just to make sure i am understanding this correctly i need to sand the spot with 1500 stick outside for 3 days and then go back to buffing?

 

['68 Coronet R/T]

So you have sanded and buffed it twice already?
How many coats of clear do you have on there?

 

[Chandler]

in this exact spot it was cut once buffed then sanded briefly with 3000 and buffed started with 7 coats

 

['68 Coronet R/T]

Great, you shouldn't have any worries then in opening it up by sanding with 1500 to dull the surface and letting it sit in the sun.

 

[Chandler]

alright thanks for all the help! Will let y’all know how it goes.