repairing a plastic dash

B

bomccorkle

We are currently working on a 93 short wide Chevy, the dad is cracking in all of the usual places, and its a full in and out color change. The idea was to fiberglass mat the backside then fill and smooth the topside prior to paint. Was just wondering what you guys are using for similar repairs? Also there are a couple of places in the top that don't have any accessibility to the backside and was trying to find an epoxy or even panel bond style material to glue those cracks back together ? Any help would be great, thanks in advance.

Bo
 
Prep area, get Duramix two part plastic repair or sem problem plastic repair, cut piece of wax paper bigger then repair area, apply repair to the wax paper and lay over repair then use a spreader to smooth out the filler, let dry 15 minutes and pull off wax paper, it will hold the repair material in place and leave a perfectly smooth surface.
a four inch split can be done in 30 minutes, start to finish with most of the time being watching it dry. This also works good on bumpers.
 
Awesome, even easier than expected, you are the man mister Barry.
 
You must log in or register to reply here.
Back
Top