So close to perfect... I missed a spot!

C

cstrom72

image_4179.jpg

image_4180.jpg

image_4181.jpg

So I ended up clearing my PPG single stage on the dash and the trunk area. Turned out really nice except for one spot I missed with the base! I'm not real experienced when it comes to fixing things like this so a little advice would be very appreciated.

I sprayed the interior and trunk in the upright position as seen in the first pic. I thought for sure I had good coverage with my base but just out of my sight on the driver side of the dash I totally missed a spot haha. I got it with clear but you can see the epoxy.
What's my option to fix this? Can i get away with scuffing the area and use the touch up gun? Or do I need to scuff and re clear the entire dash? The rest of the dash came out so well! A little bit of orange peel on the flat areas (which are all covered by dash panels anyway) but all the curves that are seen are like glass. Total Rookie mistake :)
 
Looks like you can tape the edge, cover the rest and spray that little side section. You might have an edge but I don't think it'll show up to bad. Pull the tape off right after you spray so it melts in a little.
 
Actually I got really lucky. Looks like the dash pad completely covers that spot! Wheeew- haha thanks though
 
You must log in or register to reply here.
Back
Top