JimKueneman
Mopar Nut
Camera trickery... it is filthy.
A100 Twins
- Thread starter JimKueneman
- Start date
JimKueneman
Mopar Nut
You going to take the GTX to Watson Lake? May bring one of mine to show instead of sell this year.
'68 Coronet R/T
Oldtimer
I doubt I'll have it done by then. Seems I keep running into very hard to find parts that I need.
RosharonRooster
Promoted Users
I went to Phoenix this past weekend. The weather was fabulous. I could live outside with that low humidity
JimKueneman
Mopar Nut
The problem with Phoenix is last year it never went below like 101 for almost 2 months. The days were nothing below 115.
JimKueneman
Mopar Nut
All sanded and a few chips from clumsiness fixed. Tomorrow is buffing time.
Anybody that’s been following knows I can’t leave well enough alone, if there’s sunshine there’s work time. This is one pass with a wool pad and CSI polish after 1500 grit wet. Finish it up tomorrow.
Anybody that’s been following knows I can’t leave well enough alone, if there’s sunshine there’s work time. This is one pass with a wool pad and CSI polish after 1500 grit wet. Finish it up tomorrow.
Last edited:
Toolin
Promoted Users
Damn nice work Jim!
Treeslayer
Mike
as good as it looks, idk if i'd bother.
JimKueneman
Mopar Nut
Only one side of the cab is done.
JimKueneman
Mopar Nut
Just need to hit the RH side with a foam pad and swirl remover and buff out below the tailgate. The rear bumper is hammered out ready for pickup and test fitting before chrome.
JimKueneman
Mopar Nut
Treeslayer
Mike
i am wondering if it will have an even bigger traction problem than a regular shortbed..........perhaps Jim will post burn out pics?
JimKueneman
Mopar Nut
Been 40 years since the last burnout. Don’t hold your breath!
Treeslayer
Mike
oh oh Jim, i might dare ya when shes all done. its pretty hard to resist, at least once lol.
JimKueneman
Mopar Nut
Sorry man, just not me anymore.
Whitesnake
Newbie
Man she sure is straight! Turning out real nice. You must have the next restoration lined up by now, no?
JimKueneman
Mopar Nut
Only was going to work a few hours on the truck. Eight hours later….. door guts are blasted, painted, lubed and assembled. Only thing left is dig the glass and channel out and see what shape it’s in. I have several other pieces of glass if the originals are too bad.
The door handles and window cranks are at the chrome shop and the vent handles are too so they can be polished.
These are Tradesman doors with the holes for the lower trim. Need to get the material to make a vinyl door lower panel.
Love Herb’s interior paint. MOPAR specific interior color only.
The door handles and window cranks are at the chrome shop and the vent handles are too so they can be polished.
These are Tradesman doors with the holes for the lower trim. Need to get the material to make a vinyl door lower panel.
Love Herb’s interior paint. MOPAR specific interior color only.