jeffcamarobaby
Promoted Users
Can you help. I need to fill areas of major dings and dents. Had to #80 da to metal in several areas and #80 to remove bc/cc. Looks like previous paint and body guy used rust defender for high build; not sure what is under that but it's held up pretty well for 20 yrs. Plenty thickness to fill over spot epoxy areas and #120 block.
Question - should I use both 700 and 710 w&g over break thru metal areas before brushing spi black epoxy and will either cause issues with rust defender provided plenty of dry time?
Plan is to brush 3 coats epoxy over 8 to 10 hr period per Barry and wait two days before filler work and then work down to #400 before sealer and SS.
Thanks in advance.
Question - should I use both 700 and 710 w&g over break thru metal areas before brushing spi black epoxy and will either cause issues with rust defender provided plenty of dry time?
Plan is to brush 3 coats epoxy over 8 to 10 hr period per Barry and wait two days before filler work and then work down to #400 before sealer and SS.
Thanks in advance.