Have you tried the LPH 300? I'm having a hard time getting it set up right.I have 3 LPH 400 1.4 one sine they first came out — base or clear perfect.
A number of satas RP's from 2000rp to 5000rp great clear guns.
I use them just about daily testing batches at the minimum.
It's a personal style as to what gun works best for that person.
No one right answer.
What is your preferred at the gun regulator?My 2 cents worth as I don't think I could make the lph orange peel paint.
If all the adjustments were played with and the air is right, it can only be a distance of gun from the panel.
Gun is made like all compliant guns 5 to 6 inches from the panel.
You are always welcome to call me with a gun in hand and a test panel; the answer is minor, and we can figure out.
Two other non-painters use my gun at the plant and will do pretest batches for me sometimes, and they lay it slick, but they leave my adjustments alone.
150+ at the wall.
Fan 90% wide open
No filters in the gun.
Fluid 2.75 to 3. Turns out.
26 to 28lbs at the gun with the trigger pulled.
Aluminum cup top, the peephole is drilled out 1/8 of an inch dia.
What is your preferred at the gun regulator?
Just ordered 2.Motor Guard RG4049 1/4 NPT Spray Gun Regulator
All I have used for at least 20 years, the Iwata, sata regulators are a waste of money and don't last as long as the motor guard.
Now that I think about it, that's a company SPI should look at buying.
Nine months ago offered to buy a paint company that was purchased by a major that failed, and I knew all they would do is kill that company, sure enough.
My 2 cents worth as I don't think I could make the lph orange peel paint.
If all the adjustments were played with and the air is right, it can only be a distance of gun from the panel.
Gun is made like all compliant guns 5 to 6 inches from the panel.
You are always welcome to call me with a gun in hand and a test panel; the answer is minor, and we can figure out.
Two other non-painters use my gun at the plant and will do pretest batches for me sometimes, and they lay it slick, but they leave my adjustments alone.
150+ at the wall.
Fan 90% wide open
No filters in the gun.
Fluid 2.75 to 3. Turns out.
26 to 28lbs at the gun with the trigger pulled.
Aluminum cup top, the peephole is drilled out 1/8 of an inch dia.
Fan 90% wide open
i just ordered one also. I've used the iwata that came with my lph400 for years. May be part of the problem with Universal.Motor Guard RG4049 1/4 NPT Spray Gun Regulator
All I have used for at least 20 years, the Iwata, sata regulators are a waste of money and don't last as long as the motor guard.
Now that I think about it, that's a company SPI should look at buying.
Nine months ago offered to buy a paint company that was purchased by a major that failed, and I knew all they would do is kill that company, sure enough.
When you say 90% open on the fan, how much of a turn is that in from fully open?
After reading your posts I have something Id like to try with my air system too, it seems like a small change but might make a good difference.