Search results

dont be afraid to build off frame.

get plenty of wheels. those veins are going to eat up polishing wheels.

amazon has a huge selection of rivet tools. 20 bucks or less.

flaring tool.

i think you get a clearer surface.

use your finger. spray a wet coat then smear it around the pin hole areas.

spi red is as close as it gets.

clear wont magically get rid of a brown hue.

Bead It Up or chemical guys Hydro Charge.

solid black , single stage . i see no brown tint in spi black.

"For all the bashing people do about Summit and Eastwood paint products" they relabel cheap junk low line paint. usually, Valspar or Kirker.

yes.

i use the cheapest white paper towels i can buy wholesale.

rule of thumb, solvent cleaner will not work on biodegradable stuff. that is why i use dawn soap first.

orange peel is fluid control runs are air pressure control. how good you are means nothing when changing to high solids. whole new animal. up your air 5 lbs and back off just a little. if your gonna run it run it to the ground. a sag is flow hitting a dry spot.

rust defender is a great product. but spi epoxy will give you the same results for less money and is much easier to use. i used nothing but epoxy on this car and it was a disaster before i started.

https://www.harborfreight.com/industrial-paint-spray-gun-43760.html

https://www.amazon.com/Astro-ASMS2-Tree-Masking-Station/dp/B00063ZPOM/ref=sr_1_2?crid=2VQS87MHILOOQ&keywords=masking+tree+auto+body&qid=1697209436&sprefix=masking+tree%2Caps%2C191&sr=8-2

i prefer a reflection of an 8ft tube.you have to have the reflection or you cant really see the pattern. put lights along the top of the wall and one in each corner.

set it on some blocks ( cab side ) . put paper down first. you can walk around and shoot everything standing up. one guy i worked for in the 70's hung the bed upside down. sat on a shop stool to paint the inside.