W
walkvet48
I am preparing my 73 corvette for paint and need an opinion on how to do the bond joints on the front fenders and rear quarter panels. The traditional method seems to be to grind a dish or bevel about 2" wide along the length of the joint and then fill with fiberglass mat and resin. I have heard of a second method that uses Evercoat Vette panel adhesive in place of the mat and resin.
Have any of you used the second method and if so what's you thoughts on this process?
Thanks
George Walker
Have any of you used the second method and if so what's you thoughts on this process?
Thanks
George Walker