B
bmxpegan411
Hi Guys,
I buffed the trunk of my car to get away from sanding everything else for a while and I'm curious, how do you know how much clear is left after wet sanding? Also, how long should you work the compound? It seemed like I was wiping alot off that didn't get worked in, and I don't think I was using too much because I'd just do a couple quarter sized drop per 2x2 section.
I used euro 2020 mixed 4:1:2ish and applied 4 coats, then sanded with 1500 then 2000 until all the peel and imperfections were gone, which wasn't a lot surprisingly.
after it was flat I used a wool pad with Meguires Ultimate Compound, followed by Ultimate Polish on a foam finishing pad. On the other panels I'd like to use something more abrasive for the first pass, but don't want to cut it too much.
I buffed the trunk of my car to get away from sanding everything else for a while and I'm curious, how do you know how much clear is left after wet sanding? Also, how long should you work the compound? It seemed like I was wiping alot off that didn't get worked in, and I don't think I was using too much because I'd just do a couple quarter sized drop per 2x2 section.
I used euro 2020 mixed 4:1:2ish and applied 4 coats, then sanded with 1500 then 2000 until all the peel and imperfections were gone, which wasn't a lot surprisingly.
after it was flat I used a wool pad with Meguires Ultimate Compound, followed by Ultimate Polish on a foam finishing pad. On the other panels I'd like to use something more abrasive for the first pass, but don't want to cut it too much.