clear choices?

  • Thread starter platinum performance
  • Start date
platinum performance;18216 said:
why is the uc labeled as user freindly?im looking for a clear thats a high solid scratch resistant coating,with good uv protection.i can figure out the proper viscosity once i start to spray.what makes universal better over ,ms,euro?other than being user freindly?thanks.
Click to expand...

UC boasts ease of spraying, fast flash, and high resistance to problems like solvent pop and dieback. I still think it's the best first purchase, based on your results other recommendations can be made. Since some of the reason multiple clears exist is due to personal preference and not performance characteristics alone, use of the product by the individual is crucial in making a decision. If there was only one best clear, SPI would only offer far fewer products.
 
crashtech;18219 said:
UC boasts ease of spraying, fast flash, and high resistance to problems like solvent pop and dieback. I still think it's the best first purchase, based on your results other recommendations can be made. Since some of the reason multiple clears exist is due to personal preference and not performance characteristics alone, use of the product by the individual is crucial in making a decision. If there was only one best clear, SPI would only offer far fewer products.
Click to expand...
im really likeing the euro do to its mix ratio,,,4.1-4.1.3,based on my exp.this would give me more control of flowout and and less likely of dieback or solvent pop...as these are usally attributed in part to trying to acheve that super glossy finish.i really want to try spi...and for some reason euro is in my head.tech sheet says its a high solid product,users here on the forum say its scratch resistant....just tired of ppg and all of the high dollar clears...
 
I'm happy with the Euro 5000, it serves as the all-around clear in my shop. I carry both the normal and slow hardeners, between these, all the SPI reducers, and Polar Accelerator, I can cocktail clears that suit my every need. There is also a fast hardener, but I have found no need for it in my process, and imo it doesn't spray quite as well as the normal.

If you are set on trying the Euro, I would recommend starting with the slow activator. This leaves the buffing window open a bit longer, which is important especially on big/nice jobs, which is what you have said you are doing.

I always reduce the Euro 4:1:1.5 now, it has proven to be the best for my style and conditions.
 
You must log in or register to reply here.
Back
Top