1
1Black80Z
I bought some SPI black epoxy a little over a year ago that I've never opened for a car I sold shortly after. New project leads me to a different direction. My question is, if I use up the quart of black epoxy say on fenders, if I shot gray epoxy over it, am I going to get shading that could be detected in the later layers of primers and paint...for example, if I shot the fenders 1st coat in black, came back with gray over the fenders...would there be a different shade effect from the rest of the car done in all gray epoxy when all is complete?
I thought of saving the black for under the car, maybe the front fender wells...but I'm a long way off from this step...and I don't want to waste the black epoxy...
I may just go with the red epoxy and mix some black into it...
final color will proably be what the car left the factory in...1971 GM Lime Green...
Thanks!
I thought of saving the black for under the car, maybe the front fender wells...but I'm a long way off from this step...and I don't want to waste the black epoxy...
I may just go with the red epoxy and mix some black into it...
final color will proably be what the car left the factory in...1971 GM Lime Green...
Thanks!