O
Oramac
Hi all, Am starting the latest "project", its a custom horse drawn wagon similar to the Budweiser wagon. It was built in the 80's and the owner says it time to repaint and replace some of the moulding that has absorbrd water and paint has flaked off. The wagon was painted what looks like Single stage originally and is in very good shape. Heres the plan: remove existing bad moulding, replace with PVC type( and backcaulk), sand all panels, fill any dents, chips with JB epoxy, sand as needed. There will be bare wood on some edges etc, so I think using epoxy all the way thru would be best,( stays flexible on wood) probably 3 sessions, sanding as needed between coats, seal w/ epoxy, spray 2-3 coats single stage or basecoat color, then clear with UV. Most of the panels are MDO plywood, (exterior sign painters board) Probably will use either deltron or omni single stage, or omni basecoat. So, anyone done it this way?? Whatcha think about this process?? Thanks, C