R
ryan1
I gave up trying to rent a booth and just built one inside my garage.
All framing is built so it comes out in panels(1-5/8" 20 ga steel studs)
It measures 14'x10'x8' with a 7' wide sliding door
The filter wall uses standard 20"x20" tacky spray booth filters
Built a baffle box that fits in a 3-0 opening that holds a water tray to catch exhaust debris, then exiting through a 24" direct drive 1/2 hp motor.
Booth uses house heat and additional heat from garage heater (30,000 btu reznor separate combustion furnace)
Able to run at 70°f with 50° outside air temp.
Also built a moisture trap for air compressor out of 2" sch 40 pipe with two drains running to a filter and coalescing filter
All framing is built so it comes out in panels(1-5/8" 20 ga steel studs)
It measures 14'x10'x8' with a 7' wide sliding door
The filter wall uses standard 20"x20" tacky spray booth filters
Built a baffle box that fits in a 3-0 opening that holds a water tray to catch exhaust debris, then exiting through a 24" direct drive 1/2 hp motor.
Booth uses house heat and additional heat from garage heater (30,000 btu reznor separate combustion furnace)
Able to run at 70°f with 50° outside air temp.
Also built a moisture trap for air compressor out of 2" sch 40 pipe with two drains running to a filter and coalescing filter