S
Steves69LS3
- Need help diagnosing compressor
I have an eaton 3 stage 7.5hp pump Its about 3 yrs old. Properly maintained The other day while i was using it my transfer pipe burst at the fitting Now this is a big pump and motor sitting on a 60 gal tank meant for a smaller set up. But as i upgraded i put a bigger baseplate to accomodate Transfer pipe consists of a sharkbite steelbraided 3/4" hose connected to a sharkbite 90 degree fitting to 3/4" copper pipe into tank relief valve Now this setup worked flawless for years Lately i noticed a little bit of oil seeping out of fill plug. Emailed eaton and they said to check valve to see if it releases head pressure after shutting down It does. Switch and valve are working correctly I put new transfer hose and firtings on and decided to run pump with the oil fill cap off Please take a look at the video and any input is greatly appreciated P.s Eaton does not make this pump anymore and a new one is $450