drdan
Promoted Users
So I’m working on one of my old cars had it down to bare metal and epoxy primed it. Did some light fill work and thought I would go ahead and epoxy then 2k.
Well…. My dumbass mixed 4-1 and sprayed it. It’s supposed to be 1-1. I’m not a professional like most of you, I’m a very serious hobbyist so I do as much as I can by myself and ask a lot of questions so be easy on me. Should I let it sit and then re-sand and reapply the epoxy or re sand and apply the 2k?
I’ve always had good luck and a routine of putting the epoxy primer then doing the light fill work one coat of epoxy, then 2k from there for blocking before paint. If someone has run into this before, I am all ears.
Well…. My dumbass mixed 4-1 and sprayed it. It’s supposed to be 1-1. I’m not a professional like most of you, I’m a very serious hobbyist so I do as much as I can by myself and ask a lot of questions so be easy on me. Should I let it sit and then re-sand and reapply the epoxy or re sand and apply the 2k?
I’ve always had good luck and a routine of putting the epoxy primer then doing the light fill work one coat of epoxy, then 2k from there for blocking before paint. If someone has run into this before, I am all ears.