Hey folks, about six months ago I bought a gallon of primer + activator.
The primer is Black Epoxy 6620-1.
After using half the gallon four months ago, I secured the lid back in place and stored it in an unused bedroom that never got below 68F or above 78F. The lid does still have the plastic seal "rope" that goes around it.
Today I opened it to use the rest and found that the bottom 1 or 2 inches of the can is thick sludge.
Is that normal? I'm new at paint and am a DIY'er.
I was able to free up the sludge after about a minute of mixing it with my gloved hand (new surgical gloves).
I'm guessing it's gone bad?
The primer is Black Epoxy 6620-1.
After using half the gallon four months ago, I secured the lid back in place and stored it in an unused bedroom that never got below 68F or above 78F. The lid does still have the plastic seal "rope" that goes around it.
Today I opened it to use the rest and found that the bottom 1 or 2 inches of the can is thick sludge.
Is that normal? I'm new at paint and am a DIY'er.
I was able to free up the sludge after about a minute of mixing it with my gloved hand (new surgical gloves).
I'm guessing it's gone bad?