rustover
Member
Hey guys, sprayed some base/clear for the first time today. The sealer and base went good, but I had some problems with the clear. I sprayed the base and it had sat for about 5 hours, I tacked it off and sprayed the clear. My gun Tekna settings were 28psi 2.25 turns out. I had a trunk lid and the lid of the cover that I'm working on. I sprayed the first coat and I layed it down pretty slick but no runs. After a few minutes I checked on it and thought I had got a lot of trash in it. Come to find out it was a crater and it was just one in a certain spots but they were scattered across the whole panel. Almost looks like a solvent pop but its the first coat. Not sure what happen. I did put a second coat on the lid and but it didn't help. Now I'm not sure what to do. I doubt they will sand out, I'm guess I will have to sand the panel in 800 and try again. Let me know what you guys think. Thanks for the help.
The pics make it look good, but its not. lol
The pics make it look good, but its not. lol