V
Velvethamma
I have been following the SPI forum for a while now and decided to order some Euro 2020 for my small collision jobs. Got tired of spraying the majors watered down clears and wanted to try out the Euro due to all the good feedback on this site. Sprayed the front bumper cover over the weekend and it turned out almost perfect. With a little tweaking the gun settings and mix ratio I think I may have found my new clear. I did get a little bit more peel than I wanted (even though it's better than the roller texture on the rest of the vehicleand a few runs so I am interested in a little bit of direction. I spray my clear with an Iwata LPH 400 LV4 1.4 tip and the silver cap. Shot the Euro 4:1:1 on this Chrysler van with slow activator and slow reducer in an 80 degree shop. Gun was about 2 1/2 turns out on the fluid and 1 turn back from full open on the fan to clip the split out of the fan. Air pressure around 24-25 ish. I know some have posted their starter setup for this clear but I cannot find it for the life of me. This being the first time I sprayed it, I think I did pretty well. Maybe choking the fluid a tiny bit and or speeding up my passes may be all I need but any input would be appreciated.
Shawn
Shawn