B
bomccorkle
I have a 69 mustang that I have replaced the quarters, door skins, fenders, floors, etc. I have ground all of my welds back down to "remove the bead" and filled several pinholes from the spot method and also filled holes from shaving ornaments and such. My question is, and maybe I'm attacking this all wrong, but I was thinking that I should fill and level all of my low spots first then block sand it out then shoot epoxy primer and then paint (if I don't have to go over and re block after primer) if I have to reblock I assume that I'll have to shoot a sealer over then paint? Sorry this is my first go round and I'm just trying to get it right. Any help would he swell.
Thanks
Bo
Thanks
Bo