Absolutely new to this so I can hear the eye rolls already. Never painted so that process kept getting pushed back. I started my metalwork and as I was new to that it was frustrating. I broke up my metalwork by doing bodywork over completed areas of metalwork. Generally used a first coat of short strand fiberglass over welds and finished with filler. Years later I am close to finishing metalwork but now I have a heavy layer of surface rust on rest of vehicle. My plan was to Ospho entire vehicle and neutralize/wash when ready to epoxy. My question is what effect will Ospho and water have on my finished filler? I also was reading some other posts and am now wondering what was left on my metal after chemical stripping. Description says it will be neutralized, washed and a rust inhibitor applied so metalwork can be done. Opinions/suggestions welcome. I assume fiberglass would be fine but filler?
Would definitely do things differently now, but this is what I have to work with.
Would definitely do things differently now, but this is what I have to work with.