Problems spraying epoxy today

6

64chevmn

I sprayed several gallons of epoxy over the past few months with no issues at all. The past few days I had several spots show up on my panels that look like there was some contamination that made the epoxy do some weird stuff. It showed up on a few panels that were freshly sandblasted and one panel that was a re-coat after a one hour flash time after the first coat. Did I not induce the epoxy long enough or did I do something else wrong? Here is a picture of what the epoxy did image.jpg
 
Happens to me when I spray to heavy and not enough flash time.
 
I did the exact same thing when I was practicing before spraying my car with Epoxy. It mainly happened to me when I was too close and/or moved to slowly.
 
Thanks for the responses; I thought maybe some moisture made it past my water traps and spit out of the paint gun. It is possible that I dumped it on too heavy.
 
just to be sure did you let the primer induce for 30 mins before you sprayed it?
 
Happens to me all the time with epoxy when
piling it on to fast.
Never happens with 2k.

- - - Updated - - -
 
You must log in or register to reply here.
Back
Top