oldjunkster
Member
Will be using SPI black epoxy as a top coat on my inner fenders splash pans, etc.
1. What is a good rule of thumb for the amount of reducing the epoxy for using as a top coat using a HVLP gun with a 1.4 tip?
2. If you say "reduce 25%" is that say 8 oz. epoxy, 8 oz. activator and 4 oz.reducer? I am confused if the reduction is calculated based on the 8 oz. epoxy and 8 oz. activator or if it should be calculated on the 8 oz. epoxy only which in this case would only be 2 oz. reducer?
Thanks in advance.
1. What is a good rule of thumb for the amount of reducing the epoxy for using as a top coat using a HVLP gun with a 1.4 tip?
2. If you say "reduce 25%" is that say 8 oz. epoxy, 8 oz. activator and 4 oz.reducer? I am confused if the reduction is calculated based on the 8 oz. epoxy and 8 oz. activator or if it should be calculated on the 8 oz. epoxy only which in this case would only be 2 oz. reducer?
Thanks in advance.