D
deadchane
I am getting small white specs (snow flakes) in my universal clear. The universal is mixed with normal activator and SPI flattening agent 1:1:1 It's mixed thoroughly and I am also double straining it before it goes in the gun.
I spoke with Barry on this problem and he suggested that I reduce my air pressure at the gun. I followed his recommendation however, I still achieved the same results -flakes.
I'm spraying with a Sata Mini Jet 1.0MM at 75 degrees and have tested (with trigger pulled) air pressure anywhere from 15 - 25lbs all with no luck.
Any suggestions are appreciated...
I spoke with Barry on this problem and he suggested that I reduce my air pressure at the gun. I followed his recommendation however, I still achieved the same results -flakes.
I'm spraying with a Sata Mini Jet 1.0MM at 75 degrees and have tested (with trigger pulled) air pressure anywhere from 15 - 25lbs all with no luck.
Any suggestions are appreciated...