T
tinnocker
I did all my rotisserie repair work on my 65' Falcon body shell and used Eastwood epoxy primer. It was taken down to the metal before I painted the epoxy. Now I am ready to sand my doors, trunk, and hood. I needed more epoxy and this time I went with SPI epoxy. It has been about 3 months since I sprayed the body shell so it will need to be lightly sanded and coated with the SPI epoxy before the next step coat of SPI 2k primer. Will the Eastwood and SPI primer work ok together? As I said the body shell was sanded down to the bare metal, cleaned, and sprayed with Eastwood epoxy primer. The doors, hood and trunk will have 100% SPI Epoxy.
