SPI Epoxy REDUCED as a SEALER ( 1 : 1 : 1 ) cure time to K2 Application.

S

Silver 7T8

Hello All
Just got done spraying SPI Epoxy MIXED as a SEALER ( 1 : 1 : 1 )
(over the top of 600 blocked Featerfill G2.)

Next step will be 2 - Coats of SPI Regular K2
QUESTION: How Long should I wait for the REDUCED SPI Epoxy to cure?
(Again the Epoxy was REDUCED ( 1 : 1 : 1 )
Thank You
Larry - Silver 7T8
 
yup, its like base. providing you did one coat then when it flashes dull your good to go. that is with 2k primer and or base over it. never do that and apply polyester primer over. polyester needs 24hrs.
 
How many coats of featherfill? That stuff really builds .Are you sure you need that much primer?INormally I .do 3 coats epoxy over bare metal than guide coat and wetsand 180 grit the epoxy. Then 2k putty the low spots.Then 3 coats reg build and WS 180 the reg build.lastly is 3 coats reg build ,guide coat and 400 ,paint!
 
I don't have anything constructive to add except the original post looks like it was written by a programmer :) I can make fun of IT guys because I am one!
 
You must log in or register to reply here.
Back
Top