N
nastynotch347
I will start this out by saying I have not used single stage since '99.
Mixed according to tech sheet, used 65-80 degree reducer(68 in shop) Applied with a 3000 RP 1.4 tip. Perfectly even spray pattern; 2 coats 25 min apart, no runs/peel but the metallic looks very blotchy and did not orient itself properly. Would of loved to shoot base/clear but this is a low budget OTR tractor for a buddy. Should I have used a faster reducer?
Mixed according to tech sheet, used 65-80 degree reducer(68 in shop) Applied with a 3000 RP 1.4 tip. Perfectly even spray pattern; 2 coats 25 min apart, no runs/peel but the metallic looks very blotchy and did not orient itself properly. Would of loved to shoot base/clear but this is a low budget OTR tractor for a buddy. Should I have used a faster reducer?