B
Bullmoose44
Hello folks...it has been a couple of years since I finished my last project (SPI red 240Z Datsun) and now have tackled another one which has caused my some concern. I have an '80 Chevy stepside pickup that has been sitting for about 12 years and I am bringing it back to life. This will be the first two tone paint I have attempted and have a couple of questions. I have the bed off and the fenders removed but plan on working the cab as one unit. I plan on going with Chevy dark blue (Smokey Mountain Blue) (which was factory color) and then use a medium dark silver as the contrast. The fenders are no problem as I will spray them off the truck, but I have a question on the cab. I plan on using blue on the top part of cab, hood, and bed and then follow the body line on the side of the cab for a silver section on the bottom. I have read several things on the forums about how to approach two tones. Is it best to spray the minor color first, cover it with SPI intercoat, mask it off, and then spray the major color of blue of do that whole thing in reverse? If I use intercoat on the first color, should I match that with intercoat on the second color before spraying Universal clear on the whole thing? Is it best to overpsray the first color and then cover it of spray to a hard tape line? Sorry for the long post, but wanted you to have all the info for response.