danp76
Oldtimer
Hi guys, I'm not new here, but new to universal, have been using up my BASF supplies and just sprayed some universal on the front of a 57 t-bird, I'll have to get some pics. Being new to the clear I need to learn the quirks on spraying it properly. I used my lph 400 with a 1.3 tip. I thought I had to move quickly to not get it to run. I think I should of used a slower hardener, as I did get a little peel in the finish. I did get a small run and noticed that the runs are "thinner" then they are with basf clear. Coats seem to go on thin, but when I wet sanded there seemed to be plenty of material with 3 coats. I must say it buffs very nice! I think I need to just dial it in as I haven't used enough of it yet. I need to get it to lay a bit slicker, as I did get a fair amount of urethane wave in the finish. I blocked it with 800, 1500, and 2000, but still see some wave in the clear when looking at it from the side. Did mention it buffs GREAT..VERY NICE AND EASY TO BUFF!