S
Steves69LS3
Hey guys. I sprayed all my panels on my 69 camaro except the shell with epoxy as a sealer, ppg dbc base and uv clear. I used medium reducer. Temps were cooling down but i managed to keep harage above 60 degrees for a few hrs after spraying my last coat of clear. 5 coats with 30 min flash. Sometimes 45 min
My issue is that the small parts like header and valance etc that i was able to bring inside of the house a day later seemed to have dried harder than the bigger parts i was unable to bring in like the doors and fenders.
Do i have a serious issue?? Temps for the doors and fenders were kept over 60 for at least half a day. Maybe a little longer after i shut off heater
Again thank you everyone
My issue is that the small parts like header and valance etc that i was able to bring inside of the house a day later seemed to have dried harder than the bigger parts i was unable to bring in like the doors and fenders.
Do i have a serious issue?? Temps for the doors and fenders were kept over 60 for at least half a day. Maybe a little longer after i shut off heater
Again thank you everyone