T
TAguy16
I know this was discussed here a long time ago (http://www.spiuserforum.com/index.php?threads/vinyl-decals-under-clear.704/) so please forgive me for bringing this up again. There were a couple of things I saw missing from the old thread that might help when trying to do this. One thing I've read is it helps a lot to dust two coats of clear over the decal area (and let them flash well) before trying to bury the decals with heavier coats of clear. The second thing is one decal supplier for what I do recommends using Bulldog adhesion promoter and doesn't mention anything about trying to scuff the decals, which as mentioned in the old thread can damage the decal's printing depending on how it was done.
Furthermore, I read on a motorcycle forum that Harley Davidson clears over all their graphics now, and this was mentioned by someone who supposedly worked for them, so this suggests it can be done successfully because you don't see Harley's with clear peeling around their graphics.
Any further thoughts on this would be much appreciated as I'm contemplating doing this and am trying to stack the deck in my favor.
Furthermore, I read on a motorcycle forum that Harley Davidson clears over all their graphics now, and this was mentioned by someone who supposedly worked for them, so this suggests it can be done successfully because you don't see Harley's with clear peeling around their graphics.
Any further thoughts on this would be much appreciated as I'm contemplating doing this and am trying to stack the deck in my favor.