• Having site issues? Contact Dub@southernPolyurethanes.com

VPA for lead seams

So just to be clear, is Vette Panel Adhesive the preferred choice on the roof to quarter seam if lead is not used and you don't make a metal filler strip?

Thanks guys
if your going to use filler then vpa is the better choice . DO NOT use any of that worthless duraglass or anything else made by dynatron bondo. fiberglass fillers are NOT water proof or superior to anything else.
Thanks guys. I was thinking of making metal filler strips but was also thinking IF the weld seam got a little too thick it would show some ghosting also.