RosharonRooster
Promoted Users
Good evening. I have an approach in head of how get started on this project but always looking for advice since I am very much an amateur. This is a 68 impala fast back. So far me and the crew have taken it off the frame, shaved the firewall, installed a moonroof, along with other modifications. This car has a paint job on it that is atleast 20 yrs old. The car has sat in a garage since 2008. The paint job is surprising pretty nice. No bubbles, no rust. It appears to have 1 repaint and the jams and underside of trunk are original paint....the owner does not want to go bare metal. So I'm looking for advice on my approach.
1. DA entire car 80 grit. Bare metal edges, and drip railsRed pad, or hand sand jambs, and dash. White epoxy 2-3 coat to lock it down.
2. Filler work
3. 2k , guide coat, sand etc
4. White epoxy as Sealer
5. Butternut yellow
6. 3 -4 coats of euro. Proceed with wetsand.
Thoughts?
Thank you
1. DA entire car 80 grit. Bare metal edges, and drip railsRed pad, or hand sand jambs, and dash. White epoxy 2-3 coat to lock it down.
2. Filler work
3. 2k , guide coat, sand etc
4. White epoxy as Sealer
5. Butternut yellow
6. 3 -4 coats of euro. Proceed with wetsand.
Thoughts?
Thank you